Theoretical and experimental analysis of an induction planar actuator with different secondaries : a planar driver application for metallic surface inspection
dc.contributor.author | Treviso, Felipe | pt_BR |
dc.contributor.author | Silveira, Marilia Amaral da | pt_BR |
dc.contributor.author | Flores Filho, Aly Ferreira | pt_BR |
dc.contributor.author | Dorrell, David G. | pt_BR |
dc.date.accessioned | 2016-06-03T02:08:35Z | pt_BR |
dc.date.issued | 2016 | pt_BR |
dc.identifier.issn | 1424-8220 | pt_BR |
dc.identifier.uri | http://hdl.handle.net/10183/142263 | pt_BR |
dc.description.abstract | This paper presents a study on an induction planar actuator concept. The device uses the same principles as a linear induction motor in which the interaction between a travelling magnetic field and a conducting surface produces eddy currents that leads to the generation of a thrust force and can result in movement over a metallic surface. This can benefit the inspection of metallic surfaces based on the driving platform provided by the induction planar actuator. Equations of the magnetic and electric fields are presented and, by means of these equations, the forces involved were calculated. The behaviour of thrust and normal forces was analysed through the equations and by numerical models, and compared with the results obtained by measurements on a device prototype built in the laboratory as part of the study. With relation to the surface under inspection that forms the secondary, three cases were analysed: (1) a double-layered secondary formed by aluminium and ferromagnetic slabs; (2) a single aluminium layer and (3) a single ferromagnetic layer. Theoretical and measured values of thrust and normal forces showed good correlation. | en |
dc.format.mimetype | application/pdf | pt_BR |
dc.language.iso | eng | pt_BR |
dc.relation.ispartof | Sensors [recurso eletrônico]. [Basel, Switzerland]. Vol. 16, no. 3 (Mar. 2016), article 407, p. 1-18 | pt_BR |
dc.rights | Open Access | en |
dc.subject | Induction planar actuator | en |
dc.subject | Atuador planar | pt_BR |
dc.subject | Surface inspection | en |
dc.subject | Thrust force | en |
dc.subject | Normal force | en |
dc.subject | Analytical model | en |
dc.subject | Numerical model | en |
dc.subject | Measurement of force | en |
dc.subject | Linear induction motor | en |
dc.title | Theoretical and experimental analysis of an induction planar actuator with different secondaries : a planar driver application for metallic surface inspection | pt_BR |
dc.type | Artigo de periódico | pt_BR |
dc.identifier.nrb | 000988715 | pt_BR |
dc.type.origin | Estrangeiro | pt_BR |
Este item está licenciado na Creative Commons License
-
Artigos de Periódicos (39632)Engenharias (2413)